Armitron Boom Smartwatch and Earbuds Instructions

Thank you for purchasing the Armitron Connect Boom Smartwatch and Earbuds. This guide is here to assist you in navigating through the various features of your smartwatch.

FULLY CHARGE THE SMARTWATCH

Before initiating the setup process, ensure that your smartwatch and earbuds are fully charged—avoid overcharging.

Note: Charging may take up to 2 hours for the smartwatch and 60 minutes for the earbuds.

CHARGING THE SMARTWATCH

Align the gold pins on the charging cable with the gold contacts on the back of the smartwatch; they will magnetically connect. If you encounter resistance, flip the cable around. Plug into a UL-certified wall charger or a computer USB port; the smartwatch screen will display “charging.”

Note: Avoid using fast chargers.

CHARGING THE EARBUDS

Insert the charging cable into the charging port.
The charging indicator light will blink red to show that the earbuds are charging.
Once the light is illuminated blue, the earbuds are fully charged.

SETTING UP THE SMARTWATCH

Search for the ARMITRON CONNECT APP in your app store.
Install the ARMITRON CONNECT APP on your smartphone.

ARMITRON CONNECT APP COMPATIBILITY

The ARMITRON CONNECT APP will work on the following smartphones:

Android (version 5.0 and above)
Apple iOS (version 9.0 and above)

CONNECTING YOUR SMARTWATCH TO YOUR SMARTPHONE

Power on your smartwatch (press and hold the side button for 5 seconds).
Open the ARMITRON CONNECT APP.
Accept the privacy policy.
Tap the watch icon on the app’s bottom bar to start the pairing process.
Select “Add Device” and choose “Boom.”
Activate Bluetooth on your phone, and only pair your watch using the mobile app.

Note: Only pair your smartwatch and earbuds to the ARMITRON CONNECT mobile app.

DISCONNECTING YOUR SMARTWATCH & PHONE

Open the ARMITRON CONNECT APP on your smartphone.
Tap the watch icon located on the bottom bar of the app.
Tap the “REMOVE” button.
The app will display a “Are you sure?” box; select “Remove/Confirm.”

SETTING UP YOUR EARBUDS

Open Bluetooth on your smartphone and remove the earbuds from the case.
The left earbuds will start flashing red to begin pairing.
Choose “Boom Audio” from the device list.

DISCONNECTING YOUR EARBUDS

Go to Bluetooth
Select “Boom Audio”
Select “Disconnect”

SMARTWATCH POWER ON/OFF

To Turn Off: Press and hold the side button until the display asks, “Are you sure you want to power off?”
To Turn On: Hold the side button until the smartwatch screen turns on.

SMARTWATCH BUTTON OPERATIONS

Pressing the side button achieves three functions:

Unlocks/locks the screen.
Takes you back to the main dial page.
Powers on/off.

EARBUDS BUTTON OPERATIONS

Single-tap the left earbud to play the previous song.
Single-tap the right earbud to play the next song.
Dobule-tap the left earbud to decrease the volume.
Double-tap the right earbud to increase the volume.
Press for about 3 seconds to activate the voice assistant.

SMARTWATCH CONTROLS

Swipe down for quick access to Bluetooth, Vibration On/Off, Low Power Mode, Flashlight, Brightness, Weather, Settings, Date, and Battery Percentage.
Swipe up for notifications.
Swipe left for the smartwatch favorite features: steps, sleep, heart rate, exercise, weather, camera, and music.
Swipe right for the complete list of the smartwatch features.
Swipe right to exit and go back to the previous page.

MENU VIEW

To adjust the display of the watch features list, go to “Menu View” on the smartwatch, or select the “i!” icon and choose between “Menu View” or “List View.”

WIRELESS CONNECTION CALLING FUNCTION

Once the smartwatch is connected to your phone, utilize the watch’s microphone and built-in speaker to make and answer calls. Maintaining a Bluetooth connection between the smartwatch and the phone is necessary for the call function.

The watch will notify you of an incoming call.
Decline the call or ignore it.
If the earbuds are connected, the call sound will go through when you answer.

USING THE EARBUDS DURING PHONE CALLS

Quickly tapping the earbuds answers the phone call while connected to Bluetooth.
Quickly tapping the earbuds again ends the phone while connected to Bluetooth.
Press for about 1.5 seconds to reject the phone call.

USING THE EARBUDS FOR VOICE CONTROL

Press for about 3 seconds to activate the voice assistant.

SETTING WATCH FACES

Explore a range of dials using the ARMITRON CONNECT APP or directly on your smartwatch.

CHOOSING WATCH FACES FROM THE SMARTWATCH

Press and hold the main dial screen of your smartwatch, then swipe to browse. Once you’ve found the perfect dial, select that face to save.

CHOOSING WATCH FACES FROM THE APP

Discover watch faces in the ARMITRON CONNECT APP:

Tap the watch icon located on the bottom bar of the app.
Navigate to “Watch Faces,” prominently displayed at the top of the page.
Scroll through the collection and select your preferred watch face.
For more options, select the “Face Gallery.”
Customize your chosen watch face by selecting “edit.”

USING YOUR OWN PHOTO

Personalize your smartwatch by choosing a photo from your smartphone gallery as your watch face:

Open the ARMITRON CONNECT APP.
Tap the watch icon on the bottom bar.
Access “Watch Faces” and select the desired watch face to edit.
Choose “Take Photo” or “Choose From Album” to select your desired image.
Edit the photo to your liking, then confirm your choice.

Note: Grant permission to access your photo gallery from your phone settings to utilize this feature seamlessly.

WELLNESS FEATURES

STEPS

The smartwatch records the number of steps you take throughout the day. Please note your movement stats reset to 0 at midnight.

HEART RATE

Measure and monitor your heart rate. Tap the screen if your smartwatch doesn’t automatically start measuring your heart rate. You can also find your heart rate data here.

Note: To turn on “Heart Rate Warning” in the ARMITRON CONNECT APP:

For Android:

Tap the watch icon located on the bottom bar of the app.
Go to “Others.”
Scroll to “Health” and turn on “Heart Rate Warning.”
You can also choose to turn on “Continuous Heart Rate Detection.”

For iOS:

Tap the watch icon located on the bottom bar of the app.
Go to “Others.”
Scroll to “Health” and turn on “Continuous Heart Rate Alert.”

EXERCISE:

Easily choose your exercise type and track your activity by tapping the exercise icon or scrolling through the smartwatch app list and selecting “Exercise.” The watch has various exercise modes, such as Walking, Running, Basketball, Soccer, and more.

EXERCISE RECORDS:

Access past exercise data in the ARMITRON CONNECT APP. Tap the shoe icon on the app’s bottom bar and select “View Exercise Records” to see the day, week, month, year, and all records. To track and set goals for running, select the bullseye icon. Go to settings in the app and choose “Goal” to set targets.

SLEEP MONITOR

When worn during sleep, the smartwatch monitors the duration and quality of your rest. You can also find your sleep data here.

DAILY ACTIVITY

View steps, calories, and exercise data from the day in the “Activity” section of the ARMITRON CONNECT app.

MESSAGES

View all messages sent to your smartphone directly on your smartwatch.

Note: To receive messages to your smartwatch, turn on notifications in the ARMITRON CONNECT APP:

Tap the watch icon located on the bottom bar of the app.
Select “Notifications.”
Turn on “Messages.”

BREATHING

Allocate a few moments for mindfulness practice, a feature that will guide you in focused breathing exercises.

MUSIC

Play and manage music directly on the smartwatch.

To play music directly from the earbuds, make sure Bluetooth is enabled and connected,

For Android users––to display music information on the watch, go to the ARMITRON CONNECT APP:

Tap the watch icon located on the bottom bar of the app.
Go to “Others.”
Scroll to “Control” and turn on “Control Phone Music.”
Then, find “ARMIRTON CONNECT” and turn on notification access.
Click “Allow.”

NOTIFICATIONS

The smartwatch will synchronize incoming notifications from social media platforms like X (Twitter), Facebook, WhatsApp, Instagram, and more.

Note: You select the notifications you wish to receive in the ARMITRON CONNECT APP:

Tap the watch icon located on the bottom bar of the app.
Go to “Notifications.”
Select which apps you want to receive notifications from.

CAMERA CONTROL

Once your smartwatch is connected to your phone, you can conveniently control your phone’s camera. The phone must be unlocked for the smartwatch to operate the camera.

Note: Ensure camera access is enabled on your smartphone’s settings:

Go to Settings on your smartphone
Go to the Armitron Connect app
Toggle on Camera access

REMINDER TO MOVE

The smartwatch will remind you to move if you’ve been inactive for one hour.

Note: You can turn this on/off in the ARMITRON CONNECT APP:

Tap the watch icon located on the bottom bar of the app.
Go to “Others.”
Scroll to “Health” and turn on/off “Reminders to Move.”

HYDRATION REMINDER

Your smartwatch will send reminders to stay hydrated.

Note: You can turn this on/off in the ARMITRON CONNECT APP:

Tap the watch icon located on the bottom bar of the app.
Go to “Others.”
Scroll to “Health” and turn on/off/set “Drink Water Reminder.”

FIND MY PHONE

When connected via Bluetooth, the smartwatch’s “Find My Phone” feature will make your smartphone ring and vibrate. You can locate your smartwatch via the ARMITRON CONNECT APP. Tap the watch icon on the app’s bottom bar and select “Find Device.”

WEATHER UPDATES

You can view current weather and upcoming forecasts.

Note: You can further control the weather feature in the ARMITRON CONNECT APP:

Tap the watch icon located on the bottom bar of the app.
Go to “Others.”
Scroll to “Weather” and turn it on/off, set the temperature system, and set the location.

ALARM

Hit the “+” and set the alarms you want. You can also turn on/off alarms here.

Note: You can also control alarms on the ARMITRON CONNECT APP:

Tap the watch icon located on the bottom bar of the app.
Select “Alarms.”
Hit the “+” and set up your alarm.

OTHER FEATURES

Explore additional features such as a flashlight, timer, and stopwatch.

OTHER ARMITRON CONNECT APP FEATURES

On the ARMITRON CONNECT APP, when you hit the home icon, you can view your day’s stats, including steps, sleep, and heart rate. You can also set the time format, unit system, language, auto-lock, do-not-disturb, and battery saving. You can also update your device software, set up your profile, and view our FAQ.

CONNECT iOS HEALTH APP TO ARMITRON CONNECT

For iOS users—To enable your smartwatch to track steps, calories, daily health, and more, go to your smartphone’s settings. Navigate to “Health” and select “Data Access & Devices.” Under “Sources,” choose “ARMITRON CONNECT” and toggle on all the health data you want to share with your smartwatch and app. You can view your health data in the ARMITRON CONNECT APP in the settings section under “Health.”

SMARTWATCH CARE:

Avoid wearing the smartwatch while applying sprays or creams.
Avoid contact with corrosive agents like paint, solvents, or adhesives to maintain the finish.
Do not attempt to replace or disassemble the battery.

WATER RESISTANCE (IP68):

Certified water-resistant for up to 30 minutes at a maximum depth of approximately 5 feet.
Not recommended for saltwater use; rinse the smartwatch after swimming.

STRAP CARE:

Environmental conditions can affect strap durability.
Limit direct heat or sunlight exposure, keep the watch dry, and avoid contact with wet surfaces.
Clean lightly soiled straps with a weak, soapy water solution on a damp cloth.
Light-colored straps may attract color transfer; be cautious with cosmetics.
Discoloration of straps is not covered under the guarantee.

SILICONE STRAP CARE:

Clean regularly with mild soap and water.
Store the watch in the provided gift box when not in use.

BRACELET CARE:

Avoid bending the bracelet excessively; store the watch in the gift box when not worn.
If adjustment is needed, consult a local jeweler or watch specialist.
Contact customer service for further assistance.

STEP COUNTER:

Smartwatches use accelerometers; wrist actions mimicking steps may inaccurately record.
The step count is a guide; some wrist movements while sitting or standing may be recorded.

GUARANTEE:

ARMITRON CONNECT guarantees quality and style testing products before shipment.
Products are guaranteed against defective parts and construction for two years from purchase.
The guarantee requires the original receipt for validation.

Please note: This does not cover lenses, bands, straps, bracelets, water penetration, or batteries. Breakages due to accidents or maltreatment are not covered.

IMPORTANT SAFETY INFORMATION & WARNINGS:

BATTERY WARNING: KEEP OUT OF REACH OF CHILDREN

Before using the product, carefully review the safety information and instructions.

BATTERY WARNINGS:

Do not attempt to replace the battery, open the device enclosure, or disassemble your ARMITRON CONNECT product, as this may cause a safety hazard.
The integrated rechargeable battery cannot be removed or replaced.
Contact with battery acid may require immediate medical attention; flush the affected area thoroughly with clean water.
Disconnect the charger when the battery is fully charged to avoid overcharging.

DEVICE WARNINGS:

This is a Class A product, and it may cause radio interference in a domestic environment. Users may be required to take adequate measures in such cases.
Ensure proper engagement of your smartwatch with the charging contacts.
Check the product for damage before each use; do not use it if it is damaged.
This product is not a toy; children should not play with it.
Avoid opening the smartwatch and exposing it to strong impacts, vibrations, direct sunlight, or dirt.
Do not place heavy objects on the product or exert pressure on it.
Avoid strong magnetic fields, such as those from loudspeakers.
Remove the product before using saunas, as salt and thermal water can lead to corrosion.
Operate the product away from heat sources, and do not cover it during operation or charging.
Avoid using the product on airplanes, in hospitals, service rooms, or near medical electronic systems.
Only use the product if the display is intact.
Protect the product from extremely high or low temperatures.
Use non-abrasive cleaners for cleaning; remove the product if it feels warm or hot.
Avoid wearing or operating the product while charging.
Do not charge the product if it is wet.
Refrain from checking notifications or using applications while driving or in situations where distractions could be hazardous.
Always be aware of your surroundings when using ARMITRON CONNECT products and services.
Remove your smartwatch at regular intervals for gentle cleaning.
Some wearers may suffer skin irritation if the smartwatch is worn for prolonged periods. Sensitive skin, skin allergies, and medication could contribute to the irritation incurred and should be considered before use.
Enjoy your music, but please stay safe & ensure you remain aware of your surroundings. Do not use this product whilst driving or in other potentially dangerous situations. These earbuds are a class B product. In a domestic environment, these earbuds may cause radio interference, in which case the user may be required to take adequate measures.

HEALTH WARNINGS

ELECTROMAGNETIC FIELDS AND MAGNETS:

ARMITRON CONNECT smartwatches emit electromagnetic fields, and models with magnetic charging docks contain magnets.
These components may interfere with medical devices like pacemakers and implanted defibrillators.
Consult your doctor and medical device manufacturer before using an ARMITRON CONNECT smartwatch.

HEART RATE MONITOR:

Designed for recreational use only; not intended for medical purposes such as diagnosing or monitoring medical conditions.
Periodically emits flashing lights; consult your doctor if you have epilepsy or similar conditions.
Heart rate readings are generally accurate but can be affected by smartwatch fit, wearer’s physical characteristics, and activity intensity.

EXERCISE AND ACTIVITY TRACKING:

ARMITRON CONNECT smartwatches calculate distances and calories burned during training; consult a doctor before starting new exercise regimes.
Close activity, sleep, and calorie estimations may not always be accurate.

SKIN IRRITATION:

Prolonged wear may cause skin irritation, especially for sensitive skin or allergies.
Remove the smartwatch regularly for cleaning and avoid over-tightening on your wrist.

MENSTRUAL CYCLE TRACKING:

If your watch features cycle tracking, use it for personal records only; it is not intended to assist or prevent conception.
Consult your doctor if you notice anything unusual.

STRESS READINGS:

Stress readings are indicative only; seek professional help if under prolonged periods of stress.

LIABILITY AND CONTRACT:

ARMITRON CONNECT cannot be held liable for material damage or personal injury caused by incorrect handling or non-compliance with safety instructions.
For questions or concerns, contact us.

This device and its accompanying software are not meant for medical use, including diagnosing, treating, mitigating, or preventing diseases or conditions, or for any other medical purpose.

FCC REGULATORY COMPLIANCE

Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with the FCC‘s RF radiation exposure limits for an uncontrolled environment. The end user must follow the specific operating instructions to satisfy RF exposure compliance. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

LIABILITY

ARMITRON CONNECT cannot be held liable for material damage or personal injury caused by incorrect handling or non-compliance with safety instructions. This device and its accompanying software are not meant for medical use, including diagnosing, treating, mitigating, or preventing diseases or conditions, or for any other medical purpose.

Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

DISPOSAL OF GOODS Electrical products, batteries & accumulators should not be disposed of in the household waste. If you cannot reuse or recycle your article, it should be disposed of at a civic amenity site or a local authority recycling facility.

Do not dispose of your ARMITRON CONNECT product within household waste.
Disposal of the packaging & your ARMITRON CONNECT product should be done in accordance with local regulations.
Batteries are not to be disposed of in municipal waste & require separate collection.

COMPATIBILITY: THE ARMITRON CONNECT APP will work on the following smartphones:

Android (version 5.0 and above)
Apple IOS (version 9.0 and above)

Note: Make sure the App is the latest version and check for updates.

PRIVACY POLICY

armitron.com/pages/privacy-policy

NEED HELP?

If you require further assistance using your ARMITRON CONNECT product or our App, please contact us. We want you to get the most from your product, and we will always be happy to help. You can also contact our UK-based customer service team Monday to Friday, 9 AM to 4 PM, by phone or email, or our website, which is available 24/7 and contains lots of useful information.

servicedept@egluck.com

(866) 631-0342

PRODUCT INFORMATION

Operating temperature: 14℉ to 122℉

Non-operating temperature: -4℉ to 140℉

Product Name: Armitron Connect Boom Smartwatch and Earbuds

FCC IDs —

Smartwatch: 2BFCD421009BOM

Earbuds: 2AEE-SW-T118